Back

Draw Wire Sensors - HDWS
 

Draw wire sensors are suitable for measuring linear and non-linear motions. The compact style allows flexible and easy installation. Due to the small size, precise measurement is possible even in difficult applications.

 

Specials

- Easy installation

- Highly dynamic applications

- Robust housing

- Nylon jacketed stainless steel rope

- Variable outputs

- Non-linear motions

- Customized versions

- Up to IP 65

 

Applications

- Machine building industry

- Medical applications

- Store and convey technics

- Loading platforms, cranes

- Automotive industry

- Robot positioning

- Steel manufacturing machinery

- Flood gates

 

 

Technical data 

Type

HDWS-50

HDWS-60 HDWS-80 HDWS-115 HDWS-150 HDWS-230

Incremental output [mm]

1200

1500 2500 3500 5000 8000

Analog output [mm] (Poti / 0...10 V \ 4...20 mA

50/ 125/ 250/ 350/ 500/ 750/ 1000/ 1200

1500 2000 3000 4000 6500

Customized ranges on request

Acceleration max. [m/s2]

140

120 80 60 55 35

Travel speed [m/s]

10

8 8 8 7 5

Wire rope tension max. [N]

4.5

8 8 10 13 8000

Weight [g]

ca. 390

ca. 1100 ca. 1300 ca. 2200 ca. 3800 ca. 6800

Protection class

IP 65 (with recommended connector)

Humidity

85 % relative, non-condensing

 

Potentiometer Output

0...1 kW, linearity +/- 0.15 % F.S.; +/- 0.25 % range up to 250 mm

Temperature

-20...+85 0C operating, coefficient +/- 0.0025 % / K

Supply

15...26 VDC, ripple max. 80 mVss, current consumption 34mA @ 1mA/10V voltage output, 45mA @ 10mA/10V voltage output, 100 mA @ reverse polarity and rope 100% out

Output current

min. load resistance 1 kW) or 10mA @ 10V voltage output

Temperature stability

0.002 % / 0C

 

Electrical protection 

Polarity reversal and short cut protection

Connection

8-pin connector (DIN 45326) or axial cable output (length 1 m); pin 1 - supply +, pin 2 - GND supply, pin 3 - Output signal, pin 4 - GND output

 

4...20 mA output

4...20 mA, 2-wire connection, 4.5 mVss max. noise, linearity +/- 0.10 % FS; +/- 0.25 % range up to 250 mm

Temperature

-20...+60 0C operating / -30...85 0C storage

Supply

12...30 VDC, ripple max. 80 mVss

Electrical protection

Polarity reversal

Connection

8-pin connector (DIN 45326) or axial cable output (length 1m)

 

Incremental output

Line driver, PushPull (others on request), linearity +/- 0.05 % FS (+/- 0.01 % FS on request)

Resolution

5/ 10/ 25 pulses per mm (higher resolution on request)

Supply

5 VDC, 11...30 VDC, current consumption 100 mA max.

Temperature range

-20...+70 0C operating / -30...85 0C storage (higher on request)

Connection

12-pin connector (radial, turn left), cable exit (radial or axial, 500 mm)

 

Dimensions

 

HDWS-50

 

 

HDWS-60

 

 

HDWS-80

 

 

HDWS-115

 

 

HDWS-150

 

 

HDWS-230